Sand blasting and metallization of surface

When the surface is blasted, the undesirable fractions, such as grease, burrs, forge imperfections and other mechanical impurities are removal from the semi-product surface followed by their final treatment. The sand blasting of the part permits better coating adhesion to the surface. When we sand blast the large-sized workpieces, we use the moving sand-blasting booth with transiting profile in size of 5 x 5 x 15 meters. Since exterior parts is exposed to outdoor environment, their surface needs corrosion protection up to the C5 degree, and so it is metallized with various metal-molten wires, such as Al/Zn, Cu, Zn. The surface treated by metallization has the quality comparable to galvanizing.

Sand blasting and metallization of surface

When the surface is blasted, the undesirable fractions, such as grease, burrs, forge imperfections and other mechanical impurities are removal from the semi-product surface followed by their final treatment. The sand blasting of the part permits better coating adhesion to the surface. When we sand blast the large-sized workpieces, we use the moving sand-blasting booth with transiting profile in size of 5 x 5 x 15 meters. Since exterior parts is exposed to outdoor environment, their surface needs corrosion protection up to the C5 degree, and so it is metallized with various metal-molten wires, such as Al/Zn, Cu, Zn. The surface treated by metallization has the quality comparable to galvanizing.

TZ 3 - 7,5/16

The high-quality mechanical surface treatment prior to painting is a must for right and high-quality coating. 

We use the TZ 3 - 7.5 /16  high-performance fully automatic blasting booth with automatic feeder and blasting mode as the best blasting option. The machine uses a ceramic fraction of various sizes to remove mechanical dirt and scratches from the part surfaces. The result is a flawless surface for the optimum coating. 

The blasting booth is equipped with electrically controlled doors. At the bottom part, there is the rotary conveyor transporting abrasive material to the bucket elevator. The long-service life of the workspace is guaranteed by the special abrasion resistant rubber wall panels. The abrasive sorting machine separates the blasting material from dust and dirt. The swivel hook is equipped with a lifting facility with the 1000-kilograms weight capacity. The Y-shaped rail with a switch enables to hang on and hang the parts throughout the blasting process which minimizes time loss.

Parameters


Max. diameter of rotation

1600 mm

Max. suspension height

2100 mm

Hanging hook weight capacity

1000 kg

A number of hooks with lifting machine

2

A number of blast wheels

3

Blast wheel rotor diameter

350 mm

Blast wheel revolutions

2900 rev/min

Blast wheel power

7,5 kW

Total electric power with filter

31 kW


Gallery

© 2022, KOVAL systems - Powered by KreativGang, designed & developed by GoodRequest
"

We inform you that processing of personal data collected by the KOVAL Systems is under the supervision of the Euro TRADING s.r.o. and it is in accordance with the 44 § of Act no. 18/20128 Z.z. and the Article No. 37 REGULATION (EU) 2016/679 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL. The Euro TRADING s.r.o. offers you an authorized person you can contact at zo@eurotrading.sk. You can find more information at: www.eurotrading.sk/zo

Agree